Motorized Ball Valve
Valve Type: Motorized Ball Valve
Function: Provides automated on/off or flow control using an electric actuator, suitable for remote and precise operation
Design: Quarter-turn ball valve with electric actuator, available in on-off or modulating control versions
Body Material: Brass, Stainless Steel (CF8/CF8M), PVC, Carbon Steel (WCB)
Size Range: 1/2″ – 12″ (DN15 – DN300)
Pressure Rating: PN10 – PN40 / Class 150 – 300
Temperature Range: -20°C to +180°C (depending on body and seat material)
Solenoid Ball Valve
Solenoid Ball Valve
Material:
Body: Typically made from stainless steel, brass, or plastic (e.g., PVC, PP, or PVDF), depending on the application and the fluid being controlled. Stainless steel is commonly used for its strength, corrosion resistance, and suitability in higher-pressure systems, while plastic is used for cost-effective solutions or when dealing with corrosive fluids.
Ball: Stainless steel, brass, or plastic (PTFE-coated or solid plastic), depending on the valve’s design and fluid compatibility. The ball is typically hollow and provides an excellent sealing surface.
Seal: EPDM, Viton, PTFE, or NBR seals are commonly used to ensure tight sealing when the valve is closed. The choice of seal material depends on the fluid and temperature range.
Coil/Actuator: The solenoid coil is usually constructed from copper wire and enclosed in a plastic or stainless steel housing, designed to withstand the operational environment.v
Size (Nominal Pipe Diameter):
Common sizes: 1/4″, 1/2″, 3/4″, 1″, 1-1/2″, 2″, and larger.
Available in various configurations depending on system requirements and the flow rate.
Water Tank Float Valve
Valve Type: Water Tank Float Valve
Function: Automatically controls the water level in storage tanks or reservoirs by opening and closing with the rise and fall of the float
Design: Simple lever-operated float mechanism; available in single or double seat design for higher flow capacity
Body Material: Brass, Bronze, Stainless Steel, Cast Iron, or Plastic (depending on application)
Size Range: DN15 – DN200 (1/2″ – 8″)
Pressure Rating: PN10 – PN25 (up to 16 bar for most designs)
Trunnion Ball Valve
Valve Type: Trunnion Mounted Ball Valve
Function: Designed for on/off control in high-pressure and large-diameter pipelines, with trunnion-supported ball to reduce seat load and operating torque
Design: Two-piece or three-piece body, full or reduced bore, anti-blowout stem, fire-safe, anti-static device optional
Body Material: Carbon Steel (WCB), Stainless Steel (CF8/CF8M), Duplex, Alloy Steel, Forged Steel
Size Range: 2″ – 60″ (DN50 – DN1500)
Pressure Rating: Class 150 – 2500 / PN16 – PN420
Temperature Range: -196°C to +450°C (depending on seat and material selection)
Ceramic Lining Electrocar Gate Valve
Valve Type: Ceramic Lining Electrocar Gate Valve
Function: Designed for on-off service in abrasive, corrosive, or high-wear media; ceramic lining provides extended service life and reliable sealing
Design: Rising stem gate valve with electrocar (electric actuator) operation, internal flow path fully lined with high-hardness ceramic
Body Material: Carbon Steel, Stainless Steel, or Alloy Steel with ceramic lining (Al₂O₃ / ZrO₂)
Size Range: DN50 – DN600 (2″ – 24″)
Pressure Rating: PN10 – PN100 (Class 150 – Class 600)
Temperature Range: 0°C to 250°C (special designs available for higher service)
End Connections: Flanged (EN, ASME, DIN, JIS standards)
Gate Valve-Worm Gear Non-Rising Stem Cast Iron
Valve Type: Worm Gear Non-Rising Stem Cast Iron Gate Valve.
Function: Provides on-off control for water, oil, and gas pipelines with a non-rising stem design and worm gear actuation for smooth operation under high pressure
Design: Non-rising stem design, operated by a worm gear for precise flow regulation in confined spaces
Body Material: Cast Iron (often with an epoxy coating or paint for corrosion resistance)
Size Range: DN50 – DN600 (2″ – 24″)
Pressure Rating: PN10 – PN25 (Class 150)
Temperature Range: -10°C to 120°C (dependent on material and application
Resilient Seat Gate Valve
Valve Type: Resilient Seat Gate Valve
Function: Provides reliable on/off flow control with a resilient (rubber or elastomeric) seat for tight sealing, designed for low to moderate pressure systems
Design: Non-rising stem design with a resilient (rubber) seat that ensures a leak-tight shutoff even in rough service conditions
Body Material: Cast Iron, Ductile Iron, or Steel with rubber or elastomeric seat material
Size Range: DN50 – DN600 (2″ – 24″)
Pressure Rating: PN10 – PN25 (Class 150)
Temperature Range: -10°C to 80°C (depending on seat material and application)
Rubber Seat Gate Valve
Rubber Seat Gate Valve from Vcore Valve for water, HVAC and utility isolation. Seat material, coating, connection, operator and inspection requirements are confirmed by selected model and datasheet.
Bronze Cap Gate Valve
Bronze Cap Gate Valve from Vcore Valve for plumbing, marine and light utility isolation. Bronze grade, threaded connection, seat design and inspection documents are confirmed by selected model and datasheet.
Ductile Iron Gate Valve
Valve Type: Ductile Iron Gate Valve
Function: Provides on/off control for fluid flow in pipelines, offering robust sealing and durability, especially under high pressure
Design: Non-rising stem design with a wedge-shaped gate that ensures a tight seal and smooth operation
Body Material: Ductile Iron (with optional corrosion-resistant coating such as epoxy or zinc)
Size Range: DN50 – DN1200 (2″ – 48″)
Pressure Rating: PN10 – PN25 (Class 150 – Class 300)
Temperature Range: -10°C to 120°C (depending on application and materials used)
Grooved Gate Valve
Valve Type: Grooved End Gate Valve
Function: Provides on-off flow control in piping systems, designed with grooved ends for quick and easy installation without traditional flanges or welding
Design: Non-rising stem or outside screw & yoke design, compact body with grooved end connections for use with couplings
Body Material: Ductile Iron / Cast Iron with fusion-bonded epoxy coating for corrosion resistance
Size Range: DN50 – DN300 (2″ – 12″)
Pressure Rating: PN10 – PN20 (Class 150)
Temperature Range: -10°C to 120°C (depending on seat material)
Hydro Gate Valve
Valve Type: Hydro Gate Valve
Function: Designed for on/off water flow control in large-scale civil and industrial applications, often used in dams, reservoirs, power plants, and municipal water systems
Design: Rising or non-rising stem gate valve; heavy-duty structure with guided gate to ensure smooth operation under high water pressure
Body Material: Cast Iron, Ductile Iron, Carbon Steel, or Stainless Steel depending on service conditions
Size Range: DN200 – DN3000 (8″ – 120″)
Pressure Rating: PN6 – PN25 (Class 125 – Class 150)
Temperature Range: 0°C to 80°C for standard water service (special designs for higher temperature)